⚠ WARNING: Used cutting oil accumulates metal particles and bacteria. Oil mist during machining is respiratory hazard. Biocides added to water-miscible coolants can cause dermatitis. Dispose of used fluid per environmental regulations.
GHS Hazard Pictograms
⚠ Harmful/Irritant🌊 Environmental
Hazard Statements (H-codes)
H304 – May be fatal if swallowed and enters airways
H315 – Causes skin irritation
H351 – Suspected of causing cancer (used oil, recirculated)
Precautionary Statements (P-codes)
P260 – Do not breathe mist
P273 – Avoid release to environment
P301+P310 – IF SWALLOWED: Call Poison Control; do not induce vomiting
First Aid Measures (Section 4)
👁Eye Contact▼
Flush with water for 15 minutes. Seek medical attention if irritation persists.
🖐Skin Contact▼
Wash thoroughly with soap and water. Barrier cream prevents occupational dermatitis.
🫁Inhalation▼
Move to fresh air. Ensure adequate exhaust ventilation at machining stations.
🫦Ingestion▼
Do not induce vomiting. Call Poison Control (1-800-222-1222).
Storage & Handling
🔒 Storage & Handling: Sealed containers away from heat. Maintain biocide levels in water-miscible sumps to prevent bacteria growth. Dispose per hazardous waste regulations.
PPE Requirements
Safety glasses
Nitrile gloves
Oil mist collector/exhaust at machining stations
✓ Manage Cutting Oil (Metalworking Fluid) SDS with SDS Vault
Upload your SDS, get a QR code in 30 seconds
Every SDS you upload gets a scannable QR code your workers can view without logging in. Unlimited SDSs, $99/month flat.